NOVA NOTE:

4 WASHER / SPACERS NEEDED PER CAR, 2 NEEDED PER LOWER CONTROL ARM BUSHING

BY DESIGN, THESE TAKE UP SPACE ON EITHER END OF THE BUSHING & CENTER THE ECCENTRIC BOLT IN THE BUSHING SLEEVE

WITHOUT THESE 4 WASHERS / SPACERS THE ALIGNMENT WILL NEVER BE CORRECT

WHEN INSERTING THE WASHER INTO THE BUSHING SLEEVE YOU MAY NEED TO USE A DREMEL TOOL AND/OR FILE
TO BEVEL THE WASHER LIP TO FIT INSIDE THE LOWER CONTROL ARM BUSHING SLEEVE.

ID .48    OD 1.31    THICKNESS .24 AT CENTER