Description

NOVA NOTE:

FITS ALL 2 SPEED MOTORS.

MOUNTING HOLES ARE 3 7/8″ C-C.
ONE SCREW MOUNTS ON LOW METAL TAB AND ONE MOUNTS ON HIGH PORTION OF METAL UNDER COVER (SEE PHOTOS).

WINDSHIELD WASHER PUMP INSTRUCTIONS

(A) ELECTRIC CONNECTION
(B) SCREW USED PRIOR TO 1969
(C) SMALL SCREW
(D) VALVE OUTLET
(E) SCREW USED AFTER 1968
(F) SPACER
(G) CAM FOLLOWING PIN
(H) WIPER CRANK ARM
(I) FOUR LOBE CAM

DO NOT USE PUMP WITHOUT SOLVENT

1) DISCONNECT ELECTRICAL (A) AND HOSE CONNECTIONS.

2) REMOVE TWO SCREWS (C) AND (E) AND REMOVE PUMP.

3) REMOVE FOUR LOBE CAM (I) WITH SCREW DRIVER OR GEAR PULLER. INSTALL NEW CAM.

4) REMOVE DUST COVER FROM NEW PUMP.

5) 1963-1968 MODELS
INSTALL NEW PUMP AND USE SCREW (B) AND SPACER (F).

1969 AND LATER MODELS

INSTALL NEW PUMP AND USE TWO SCREWS ( C) AND (E).

6) IF NEEDED, ROTATE WIPER CRANKARM (H) FOR ALIGNMENT WITH THE CAM FOLLOWING PIN (G). SEE ILLUSTRATION.

7) REPLACE DUST COVER. CHECK HOSES FOR DAMAGE OR LEAKS. FLUSH AND CLEAN THE RESERVOIR AND ATTACH ELECTRICAL AND HOSE CONNECTIONS, THEN REFILL WITH PROPER SOLVENT. PRIMETHE PUMP BY ACTIVATING 4 TO 6 TIMES.