BLOCK CONVERSION BRACKET V8 Z-BAR

$24.95

In Stock

SMALL BLOCK (FOR USE ON ALL NON NOVA V8 BLOCKS)

Fits
Chevrolet Nova 1962-1967
Packaging
EACH
SKU/Part#
17011

Product Description

NOVA NOTE:
HAVING PROBLEMS MOUNTING YOUR CLUTCH Z-BAR TO YOUR NON NOVA BLOCK? IN CASE YOU DID NOT ALREADY KNOW, NOVA BLOCKS ARE SPECIAL!

THIS BRACKET WILL ALLOW YOU TO RETAIN ALL THE STOCK NOVA CLUTCH LINKAGE WHEN USING A NON NOVA BLOCK.

THE NOVA BLOCK HOLE FOR THE BLOCK SIDE PIVOT BALL WAS LOCATED LOW ON THE BLOCK, NEAR THE OIL PAN GASKETS, SEE PHOTO.
ALL OTHER CHEVY BLOCKS HAD ONE OR TWO HOLES UP HIGH NEAR THE HEAD.

IF YOUR NON NOVA BLOCK HAS ONE HOLE UP HIGH THIS CONVERSION BRACKET WILL WORK, JUST MOUNT IT USING THE ONE BOLT & LOCK WASHER.
IF YOUR NON NOVA BLOCK HAS TWO MOUNTING HOLES UP HIGH USE BOTH BOLTS & LOCK WASHERS INCLUDED IN THE HARDWARE KIT.

IF YOU NEED TO TWEAK THIS BRACKET TO GET A SPECIFIC ANGLE FEEL FREE TO DO SO, AVOID ANY TWEAKING AT THE WELD AREA.

PHOTO OF ORANGE BLOCK WITH OUT THE CONVERISON BRACKET IS OF A NOVA V8 BLOCK. THIS PHOTO SHOWS THE ORIGINAL THREADED HOLE FOR THE Z-BAR PIVOT BLOCK BALL, ALSO SHOWS THE RECESSED OIL FILTER

HARDWARE KIT PT# 83203

  • This field is for validation purposes and should be left unchanged.