NOVA NOTE:

USE ONLY THIS IGNITION LOCK 64001-1

THIS SWITCH IS A UNIVERSAL SWITCH

DO NOT INSTALL THIS SWITCH USING THE FLAT SPOT ON THE SWITCH, IT WILL MAKE THE LOCK UPSIDE DOWN!
FLAT SPOT IN DASH WILL HAVE TO BE REMOVED TO INSTALL THIS SWITCH
AFTER REMOVING FLAT SPOT MAKE SURE THE IGNITION KEY IS INDEXED VERTICAL BEFORE TIGHTENING SWITCH IN DASH.

(ORIGINAL STYLE SWITCH IS NOT AVAILABLE)

WARNING:
TO HAVE THE IGNITION KEY VERTICAL AND BE INDEXED CORRECTLY THE FLAT SPOT IN METAL DASH WILL HAVE TO BE REMOVED TO INSTALL THIS SWITCH

1. REMOVE BATTERY CABLE
2. STRAIGHTEN OUT ONE END OF A PAPER CLIP
3. TURNKEY TO THE LEFT, ACCESSORY POSITION
4. INSERT PAPER CLIP END INTO SMALL HOLE BY KEY
5. PRESS IN ON PAPER CLIP, YOU SHOULD FEEL A SPRING LOADED PIN INSIDE
6. WHILE PRESSING ON THE SPRING TURN KEY AND LOCK CYLINDER TO THE LEFT AND GENTLY PULL
7. CYLINDER SHOULD NOW COME OUT
8. TO RE-INSTALL PUT KEY INTO NEW LOCK CYLINDER, INSERT INTO SWITCH AND TURN RIGHT
9. RECONNECT BATTERY CABLE AND CHECK OPERATION